MASTER FENG Sausage Stuffer, Stainless Steel Homemade Sausage Maker Vertical Meat Filling Kitchen Machine, Packed 8 Stuffing Tubes (2.5LBS VERTICAL)

It's so good, easy and quick to use, I recommend it. Thank you

I have used it three times and all has been smooth. It is so much faster, for me, than stuffing sausage right off of my grinder output. It can easily be a one person job now if needed. Nothing has leaked around the plunger during stuffing as others have reported. I store it with the plunger removed so that it does not retain the compressed shape. And I rub a bit of olive oil inside tube for smooth operation.The bottom of meat compartment tube is concave and about a 1/2 cup of stuffing stays in the tube when done. Between that and what is stuck in the tube it makes a nice burger. I used the next size down stuffer tube with plastic wrap on it to push stuffing out of the tube at the end.There is an air bleeder hole in the screw for the plunger that worked great. A very small bit of stuffing came out as well but minimal. That spot can not be cleaned properly without removing the screw holding the plunger in place and fishing stuffing out of the screw hole/threads. I could also see stuffing liquid behind the lower tube seal after I cleaned the inside of the tube. So I had to remove the upper bolt/bracket that was holding tube in place. Then I could remove the seal and clean it properly. On nicer models the tube pops right out for cleaning.Aside from the cleaning part I am happy with it and would purchase it again. I don't make sausage often enough to justify, in my mind, a pricier stuffer.

Worked well to make BBQ Cheddar Jalapeno brats, German herb brats, and pheasant herb brats. It worked well, but I may have put it through too much making 20lbs of prepped sausage in one go. Towards the end, the gaskets started to burst and free from the housing. Probably would have worked well for smaller batches. With the gasket bursting, I had to disassemble the entire thing to properly clean it. This meant getting wrenches out to disassemble the main barrel. I think a different design or fastener could have made that an easier process.

Bought a 10mm tube for snack sticks. With a bit of cooking oil to lubricate the moving parts, I was able to fill 17mm casings without damage. Take care to crank an inch at a time with snack sticks, building pressure with the crank.On larger diameter sausage, it was easy to use. There will be 2 sausages worth of meat left over when done.

When our local German butcher unexpectedly closed last month, we decided to recreate his incredible smoked Gouda kielbasa at home. We're now on batch 3 and getting really close — and this stuffer has been a little miracle worker in the process! It handles the meat smoothly, is easy to operate, and cleanup is a breeze. The build quality feels solid, and the variety of tubes included is a big bonus. Highly recommend for both small-batch home use and more serious projects!

So, I will start by saying, size matters. Don't get silly here, the stuffing tube. Crap, still sounds bad!Snack sticks require a small stuffing tube, ok? That tube doesn't come with the master feng. So, you order a Smokehouse Chef 3/8" 9mm Snack Stick for LEM model 1606 606 Sausage stuffer. Great! Now you have a tube you can use!I'll keep this short. The crank handle bends when you use enough force to stuff pepperoni. So, when it comes to torque, don't use all you got in your 21" pythons brother. Leave those Hulkavitamines on the shelf.So, you Clark Kent some pepperoni sticks out when you look at the gear driven drive shaft and notice tons of metal shavings! Drop everything, take the top end off and clean it up so your pepperoni doesn't appeal to autobots. Probably needs lubrication, right? A little crisco, reassemble and get back to it dude!Next, you notice that your 90 degree angle for the upright mounted shaft drive is hotter than 100 degrees. I'll add a picture to show the end of the twist shaft rod thingamajigger. At any rate, it's f@%$#&d up. Remember, I was already Clark Kenting this beotch because I didn't want to break it. I just had a job to do.One star:Bent parts, metal shavings, flimsy crank, tubes too big, clamp to counter could have been more solid, one time use.I will not recommend this to anyone else. It's just not a quality item. 3 more dollars in parts and some hardening of tubing and gears would have been all the difference in quality.

easy to use it, feels sturdy metal. VERY HAppy with it.

The media could not be loaded. Be careful with getting plunger started each time, otherwise solid design, worth the price, and wouldn’t hesitate to buy again.