DEWALT Router Edge Guide for Fixed Base Compact Router (DNP618) Medium

This is used with the 20 volt DeWalt router fixed base!It uses two screws to attach it to the base.When done using the guide you remove the screws from the guide/router base and then screw the two screws back into their original holes on the guide!Very simple and easy to keep track of the screws!Easy to adjust distance and keeps its setting while you rout! Highly recommended!

Works perfect!

I was looking for some V-groove tongue-and-groove pine with a V-groove on both sides. Since I couldn't find any locally, figured I'd get the single-sided V-groove boards and route my own V-groove on the backside, so purchased this edge guide to help with that. The guide installs very easily on either the corded or cordless trim router with two machine screws (included), and no need to remove the router's base plate. The edge guide, once set to the needed width, is held securely in place...I didn't notice any slop or wobble when sliding along the length of the 100" long boards. One thing I would recommend...attach a piece of scrap wood to the face of the guides...this would help prevent the guide from turning once the leading edge of the guide passes the end of the workpiece (small gap between the leading and trailing faces of the guide). I'd recommend using a piece of MDF since the faces are fairly slick and would slide easily along the workpiece.

Great for those times I need an edge guide and don't have a router table. Easy on and off.

Worked perfectly

Excelente

It works well as long as you are patient with making sure to keep contact with edge while cutting groves or channels.

This was very good constrcution, didn't wiggle when tightened, very simple in design, fit on the router base with ease, and was really cheap.Later: Found the screws rather easily stripped between the screwdriver blade and the screw heads when removing them. Bought replacement screws with deeper heads at Lowes and now can remove screws with ease, no slip, no strip. Get Machine Screws, Oval Head Phillips, M4-.70 x 12. Still a great deal. Buy this!