CDI MPEM Ignition Module Box Computer for Sea Doo GTS GTX SP SPI SPX XP 587 1992 1993 1994 278-000-070, 278-000-200 278-000-262, 278-000-413,
Thumbnail 1Thumbnail 2

CDI MPEM Ignition Module Box Computer for Sea Doo GTS GTX SP SPI SPX XP 587 1992 1993 1994 278-000-070, 278-000-200 278-000-262, 278-000-413,

4.2/5
Product ID: 40077007
Secure Transaction

Details

  • Vehicle Service Type
    PWC
  • Item Weight
    0.71 Pounds
  • Connector Gender
  • Installation Type
    Plug-and-Play
  • Manufacturer
    Boise Boats
📏Compact Dimensions
📦Lightweight Design
⚙️Plug-and-Play Installation

Description

🚤 Rev Up Your Ride with Confidence!

  • DURABLE PERFORMANCE - Built to withstand the rigors of PWC adventures.
  • SEAMLESS INTEGRATION - No programming needed for quick setup!
  • OEM QUALITY ASSURANCE - Meets and exceeds OEM specifications.
  • EFFORTLESS INSTALLATION - Just plug it in and hit the water!
  • UNIVERSAL COMPATIBILITY - Fits all 587 SeaDoo models from 1992-1994.

The CDI MPEM Ignition Module Box Computer is a high-quality aftermarket replacement designed for SeaDoo models GTS, GTX, SP, SPI, SPX, and XP from 1992 to 1994. Weighing just 0.71 pounds and featuring a plug-and-play installation, this module ensures a hassle-free upgrade without the need for programming. With compatibility across multiple OEM part numbers, it guarantees a perfect fit and reliable performance for your personal watercraft.

Specifications

Vehicle Service TypePWC
Item Weight0.71 Pounds
Connector GenderFemale-to-Male
Installation TypePlug-and-Play
ManufacturerBoise Boats
UPC701649133868
Item Weight11.4 ounces
Package Dimensions5.98 x 4.25 x 2.2 inches
Item model numbersd002
Is Discontinued By ManufacturerNo
Manufacturer Part Numbersd002

Reviews

4.2

All from verified purchases

T**N

Wave runner runs again!!!

Installed on a 1992 seadoo xp that had no spark. The previous module was only 4 years old, so it didn’t seem likely that it was the problem. Replaced the stator and continuity tested everything else. Took a risk and got this module, swapped it in and bam, it started right up. Very happy with the result!!!

B**E

Worked great but follow my installation guide.

This MPEM worked great on our 1994 Seadoo GTS that did not have any spark. All the wires matched up and it only took about 15 minutes to do. One word of advice though. Do NOT remove the eight wires on the old MPEM completely or you will not know where to hook up the eight wires on the new MPEM. There are no instructions so disconnect one wire from the old MPEM and connect the appropriate new wire. Then disconnect the second wire from the old MPEM and connect the appropriate new wire, etc. Each of the eight wires is unique in color and connector so it's easy to do (see photo of original Seadoo MPEM). You will need the two wire extensions included with the kit. They are color coded so attach them to the appropriate color coded wire on the new MPEM.

B**.

Got the Sea Doo running that has sat for over 30 years.

Sea Doo had no spark, no crank, and blown repeatedly 5 amp fuses. That diagnosis led to replacing this unit. the wiring was a bit of a challenge as it wasn't identical plug & play. But with some common sense deduction and doing the obvious wires first it became apparent where the remaining wires went. The wires plugged in securely and the Sea Doo immediately would crank again and had spark. I was told online not to use these lessor priced replacements but what choice did I have? Its running and I know what wrong with the original and may have the potting dug out and the diode replaced that failed.

J**H

1993 Seadoo GTS

Fixed no spark on my 1993 GTS ski. Wires are the same color for this year, but not in the same spot. connectors arent too great on the module but i made due. fired up after. works good.

J**T

Great purchase!

This unit plugged right in and worked! Only thing I'd mention is to swap wire for wire from the original as a couple wires aren't the same colour.

B**D

Replacing the electronic module with this product solved all of ...

Replacing the electronic module with this product solved all of my rev limiting issues on my 92 SP. Replacing it was fairly quick since this has all of the necessary connections (no soldering needed) and also matching wire colors compared to the original.

M**E

Didn't come with schematic

Wires not the same color as oem. Didn't come with schematic so I'm still trying to guess how to hook up. I hope the fuses protect my wrong guesses!

B**

Easy to install

Fit prefect in my 92 seadoo. Boyfriend said it wasn’t to hard to install & he’s even color blind. Only giving 4 because I haven’t taken it out on the water, but have heard it run with it in. Little scared to see if it holds up while having it out.

Common Questions

Trustpilot

TrustScore 4.5 | 7,300+ reviews

Meera L.

Smooth transaction and product arrived in perfect condition.

3 weeks ago

Yusuf A.

Fantastic experience overall. Will recommend to friends and family.

1 month ago

Shop Global, Save with Desertcart
Value for Money
Competitive prices on a vast range of products
Shop Globally
Serving millions of shoppers across more than 100 countries
Enhanced Protection
Trusted payment options loved by worldwide shoppers
Customer Assurance
Trusted payment options loved by worldwide shoppers.
Desertcart App
Shop on the go, anytime, anywhere.
₦569101

Duties & taxes incl.

NGAstore
1
Free Shipping

with PRO Membership

Free Returns

30 daysfor PRO membership users

15 dayswithout membership

Secure Transaction

Trustpilot

TrustScore 4.5 | 7,300+ reviews

Ayesha M.

The product exactly matches the description. Very satisfied with my purchase.

5 days ago

Suresh K.

Very impressed with the quality and fast delivery. Will shop here again.

4 days ago

Cdi Mpem Ignition Module Box Computer For Sea Doo Gts | Desertcart NGA